Suggestions to Assemble TSE-03


To Japanese Page


Suggestions:

A: Seal and fix between a cylinder cover (No.1) and a cylinder (No.5) with a silicone gulue.

B: Seal and fix between a cylinder cover (No.1) and a cylinder (No.5) with a quick drying silicone gulue.

C: Fit Pistons (No.6,No.7) and piston pins (No.9) after assemble connecting rods (No.10) and a piston pins (No. 9).

D: Bend a crank shaft (No.8) after put together a flywheel (No.4).

E: Fit a Flywheel (No.4) and a crank shaft (No.8) using a wire (No.16).



Return to 'Let's build TSE-03'

Return to 'Let's Build Model Stirling Engines'

Go to Stirling Engine Home Page

Koichi Hirata